盖板模具生产抗压强度高,能够使生产出来的盖板更加平整结实,而且美观大方,采用先进的注塑公工艺,生产更加方便,加入材料振动成型即可,脱模周期短,投资小,劳动强度低.

The production of cover plate mould has high compressive strength, which can make the cover plate produced more flat and solid, and beautiful and generous. It is more convenient to use advanced injection molding technology, adding material vibration molding, short demoulding cycle, small investment and low labor intensity

总之,盖板模具使模具企业实现高精度,高效率,高柔性乃至自动化加工并满足了盖板模具制造对高质量,低成本,长寿命,短周期的要求。

In a word, the cover plate mould enables the mould enterprises to realize high precision, high efficiency, high flexibility and even automatic processing, and meets the requirements of high quality, low cost, long life and short cycle for the manufacture of cover plate mould.

盖板模具的硬度在冲击载小的时分的,盖板模具的硬度和抗磨是成正比例展开,所以这个时分的硬度上面应该做到最适合程度,不能过大过小,所以在消费的盖板模具产品的硬度上面一定要把握一个度,但是在路沿石的消费过程中,假设有较大的冲击载的时分,硬度不是越大越好,假设硬渡过大,盖板模具可能会发作分裂的现象,这样一来就会展开盖板模具产品分裂的现象发作

The hardness of the cover plate mold is developed in a positive proportion when the impact load is small, so the hardness of the cover plate mold at this time should be the most suitable degree, which should not be too large or too small, so the hardness of the cover plate mold products consumed must be a degree, but in the consumption process of the curbstone, it is assumed that there is a large impact load time, The greater the hardness is, the better. If the hardness is too large, the cover plate mold may split, so that the cover plate mold product will split

所以一定要把盖板模具的产品额硬度控制一个很好的度上面,只需这样才干****延长盖板模具产品的寿命,从而增加使市政模具工程愈加科学,愈加标准。
Therefore, it is necessary to control the hardness of the cover mould products to a good degree. Only in this way can we extend the service life of the cover mould products, so as to make the municipal mould engineering more scientific and more standard.